©2010 Al-Barrak Industrial Group - All Rights reserved

Al Barrak Hollow Metal Doors Division is a part of Al Barrak group of companies,  located in the industrial city of al Hassa, Saudi Arabia.  Its major service is manufacturing high quality Hollow Metal Doors and Frames for the construction industry throughout Kingdom, Middle East and GCC countries.  We have produced, supplied and installed hollow metal doors and frames to different projects in the kingdom and other countries for different application such as Hospitals,  Schools, Industrial Plants,  Ministry Projects,  ARAMCO,  Hotels and Apartments etc.

The performance of our doors and frames are enhanced by incorporating superior quality materials and workmanship.  Door core options include polyurethane, honeycomb and steel stiffened with fiberglass or rock wool insulation.  Each core is available in numerous door styles and wide range of application needs.   Our goal is to provide you with the highest quality products backed our dedicated customer service.  Our professional  Engineers and Technicians  are available to offer you personalized service to fulfill your  needs promptly and efficiently.  You will find everything you need to get those door openings operational at the lowest cost and within the shortest possible time frame.  All of our customers will testify to the success of our efforts.   Large orders of frames and / or doors can be shipped direct to your jobsite in the Kingdom.

Cold rolled steel sheets confirming to ASTM A366

Face sheets thickness : 1.00 mm (20 Gauge).

Mechanically interlocked face sheets with edge seams.

Internal Core : Foamed polyurethane core bounded to door face sheets for total surface support. Impact resistant.

Thermal Insulation Performance : 
R-Factor = 14.97 
U-Factor = 0.067

Sound Insulation Performance : 
STC = 26

Over all door thickness : 45 mm

4.00 mm thick hinge reinforcement for full mortise hinge of 4.5"(114.3mm) height.

Flush top channel.

Inverted bottom channels.

Painting : Coated with rust inhibiting epoxy primer in compliance with ANSI

A224.1. Finish paint to be applied at the site by others after installation.

Standard Door Features

Fire rated uo to 3 hours in accordance

with ANSI/NFPA 252 and UL 10(b) standards. 

Hot dipped galvanized steel sheets confirming to ASTM A 526.

Sheet Thickness :
  Heavy Duty :

  1.20 mm thick (18 Guage). 

  Extra Heavy Duty :

  1.50 mm thick (16 Gauge). 

4'' (101.6 mm) or 5'' (127 mm)

height hinge reinforcement.

Seamless edges.

Internal Core :
1 Fiber Glass Insulation.
2 Honey Comb Insulation.
3 Mineral Rock Wool Insulation.

 Glaxing and / or Louvers.